Customization: | Available |
---|---|
Interface Type: | USB |
Connector: | USB |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
USB2.0 AM TO TYPE C, Quick Charge Cable.
Test or Examination | ||
NO. | Item | |
1 | Examination of product | |
2 | Contact Resistance | |
3 | Insulation Resistance | |
4 | Withstanding Voltage | |
5 | Insertion force | |
6 | Withdrawal force | |
7 | Durability(preconditioning) | |
8 | Durability | |
9 | Temperature Humidity Test | |
10 | Thermal shock | |
11 | Temperature life | |
12 | Temperature life (preconditioning) | |
13 | Reseating | |
14 | Vibration | |
15 | Salt spray | |
16 | Drop Test | |
17 | Resistance to Soldering Heat |
NO. | Item | Test Group | Requirement | |||||||
1 | Appearance | See with the naked eye,there shall not be any abnormality such as deformity,exfoliation of plating,ETC,which can reduce performance,No defect such as cracks scratchs or blemishes. | No damage | |||||||
2 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
10MΩ(Min) | |||||||
3 | Cable Assembly Voltage Drop |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH |
250 mV max for GND and 400 mV max for VBUS. |
|||||||
4 | Cable Conduction impedance |
Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH |
3Ω(Max) | |||||||
5 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH |
No Breakdown,No damage | |||||||
6 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA |
40mΩ(Max) Max change delta +10mΩ |
|||||||
7 | Flexibility test | ±60°/3000cycles@45cycles per 1minute,Weight is 200g. | NO Electrical NG. NO damage | |||||||
8 | Load test | 5kgf for axis force test | NO Electrical NG. NO damage | |||||||
9 | Mating/Un-mating Force test |
Nsertion force:5~20N Withdrawal force:8~20N. | 40mΩ(Max) Max change delta +10mΩ. Appearance:NO damage |
|||||||
10 | Durability | TYPE-C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ;unmating force 8~20N . |
40mΩ(Max) Max change delta +10mΩ. Appearance:NO damage |
|||||||
11 | Humidity Test | Temperature:65±2ºC, Relative Humidity:90% Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours |
NO Electrical NG. NO damage | |||||||
12 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC; time:24hours; PH Value:6.5-7.2. 5%salt solution |
NO Electrical NG. NO damage | |||||||
13 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes |
NO Electrical NG. NO damage | |||||||
14 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient |
NO Electrical NG. NO damage | |||||||
15 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. |
NO Electrical NG. NO damage |
ABOUT US:
Palconn Technology Co., Ltd. was established in Nov of 2005,which is mainly engaged in production of connectors and cables R&D, production, and sales. As a high-tech company, it provides connectors of USB 2.0, USB 3.0, Type C connector, Micro, Jack, etc. and cables of HDMI, USB2.0 and 3.0, Type C, RCA, Displayport, etc., which are widely used in communication products, such as mobile phone and computer, and high-end field of automobile and medical apparatus and instruments.
**New product development and manufacturing capabilities:
Hardware molds and plastic molds from design and development to production are completed in the factory.
**Production and manufacturing capabilities:
We have semi-automated and fully automated production lines, as well as dust-free production workshops. Meet all kinds of products production and manufacturing.
Question: Can you customize the length, color, and special requirements we need?
Answer: Of course. We tailor our products according to the actual needs of our customers.
Question: Are the toolings produced in your factory developed internally? Because we have our own brand and we need to protect it.
Answer: All our toolings and fixtures used in production are designed and manufactured in-house. We have already taken into account the concerns you mentioned. We respect intellectual property rights and will sign a confidentiality agreement with customers.
Question: How long is your production delivery time?
Answer: The standard delivery time is usually 4 weeks from the factory. For special requirements, we can assist in meeting urgent delivery times.
Question: How do you ensure the quality of your products?
Answer: For USB Cable products, we undergo at least 32 reliability tests before delivering to customers. This includes electrical performance, mechanical performance, and environmental testing.
1, Warranty period:12 month
2, Provide after-sales test validation, update environmental documents, and assist customers to analyze and solve problems encountered.