USB Am to C Cable, Charging Data Cable, USB-C Charging Cable

• Interface Type: USB
• Connector: USB
• Universal: Universal
• Cable Length: 4 to 5.9 Feet
• Switch: Switch
• Data Transmission Function: Data Transmission Function
• Model NO.: USB-UB-001-601
• Retractable: Not Scalable
• Charging Function: Charging Function
• IC Chip: With IC Chip
• Customized: Customized
• Rated Current: 6A Max.
• Rated Voltage: 20V Max.
• The Outer Material: Silica Gel
• Data Transmission Standard: 480m/S
• Built-in Protection Function: Yes
• USB a Plug: Built-in Identification IC to Trigger 6A Current O
• USB-C Plug: Built-in Temperature Protection Circuit
• Transport Package: Independent Packing + Waterproof Bag + Carton
• Specification: 6A@20V, 120W Charging data cable
• Trademark: PALCONN or ODM
• Origin: China
• Production Capacity: 500000PCS/Month

Product Description

 

Product Description

Current load capacity:6A@20V max.
supports charging power:120W.
Charging data cable

Built-in protection function
The outer material: Silica Gel


The product has been tested by 32 projects (Plug + Cable)
Plug Test Item

Test or Examination
NO.	Item
1	Examination of product
2	Contact Resistance
3	Insulation Resistance
4	Withstanding Voltage
5	Insertion force
6	Withdrawal force
7	Durability(preconditioning)
8	Durability
9	Temperature Humidity Test
10	Thermal shock
11	Temperature life
12	Temperature life (preconditioning)
13	Reseating
14	Vibration
15	Salt spray
16	Drop Test
17	Resistance to Soldering Heat

Cable Test Item

NO.	Item		Test Group							Requirement
1	Appearance		See with the naked eye,there shall not be any abnormality such as deformity,exfoliation of plating,ETC,which can reduce performance,No defect such as cracks scratchs or blemishes.							No damage
2	Insulation Resistance		Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH							10MΩ(Min)
3	Cable Assembly Voltage Drop		Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH							250 mV max for GND and 400 mV max for VBUS.
4	Cable Conduction impedance		Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH							3Ω(Max)
5	Withstanding Voltage		Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH							No Breakdown,No damage
6	Contact Resistance		Mate connectors, Measure by dry circuit,20mV Max,100mA							40mΩ(Max) Max change delta +10mΩ
7	Flexibility test		±60°/3000cycles@45cycles per 1minute,Weight is 200g.							NO Electrical NG.  NO damage
8	Load test		5kgf for axis force test							NO Electrical NG.  NO damage
9	Mating/Un-mating Force test		Nsertion force:5~20N Withdrawal force:8~20N.							40mΩ(Max) Max change delta +10mΩ.  Appearance:NO damage
10	Durability		TYPE-C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ;unmating force 8~20N .							40mΩ(Max) Max change delta +10mΩ.  Appearance:NO damage
11	Humidity Test		Temperature:65±2ºC, Relative Humidity:90% Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours							NO Electrical NG.  NO damage
12	Salt mist spray		humidity:95-98%(R.H.); Temperature:35±2ºC; time:24hours; PH Value:6.5-7.2. 5%salt solution							NO Electrical NG.  NO damage
13	Thermal shock		Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes							NO Electrical NG.  NO damage
14	Low temperature test		The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient							NO Electrical NG.  NO damage
15	Heat test		The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient.							NO Electrical NG.  NO damage

Company Profile

ABOUT US:

Palconn Technology Co., Ltd. was established in Nov of 2005,which is mainly engaged in production of connectors and cables R&D, production, and sales. As a high-tech company, it provides connectors of USB 2.0, USB 3.0, Type C connector, Micro, Jack, etc. and cables of HDMI, USB2.0 and 3.0, Type C, RCA, Displayport, etc., which are widely used in communication products, such as mobile phone and computer, and high-end field of automobile and medical apparatus and instruments.

Our Advantages

 

**New product development and manufacturing capabilities:
Hardware molds and plastic molds from design and development to production are completed in the factory.

**Production and manufacturing capabilities:
We have semi-automated and fully automated production lines, as well as dust-free production workshops. Meet all kinds of products production and manufacturing.

UL Cable production workshop


 

Certifications